The spatial layout of organic fertilizer fermentation equipment is closely related to the size and investment of infrastructure. A reasonable layout of organic fertilizer fermentation equipment can reduce investment, effectively utilize production space, and maximize the effect with the least amount of money.
How to Make a Good Space Layout for Organic Fertilizer Fermentation Equipment
1、 The impact of raw materials on the process equipment and plant design of organic fertilizer production lines.
Due to the different raw materials, which affect the production process, most organic fertilizer raw materials have pollution effects. One situation is that for the pre-treatment process of raw materials, the manufacturer can directly pre-treat the raw materials in the breeding farm or planter, and then store and transport them to the manufacturer in a closed manner; Another scenario is to directly collect untreated waste from growers and farms for pre-treatment in the factory area. These two methods have a direct impact on the construction of processing zone area.
2、 The influencing factors of fermentation process.
The fermentation process needs to be based on the amount of materials. Currently, the fermentation process that meets national production standards is aerobic fermentation, and the fermentation cycle consists of two parts: fermentation maturity and secondary aging. In order to meet the standards, it is recommended to use tank fermentation or stack fermentation as much as possible. Compared to the two, with the same production capacity requirements, stack fermentation occupies a larger area of the factory area.
Another factor affecting the fermentation process is the fermentation equipment used. Tank type fermentation often uses a mobile crane with multiple tanks for fermentation, and the overturning and throwing process directly realizes the movement of materials towards the discharge port. The secondary aging stage can be transferred from the fermentation tank, thus achieving continuous fermentation,; However, the stack type uses a walking composting machine or a tipping machine, which is inherently inconvenient for material transfer and often results in the secondary aging process stage being aged in place, affecting the fermentation cycle.
3、 Process impact in the later stage of deep processing.
The post processing process of organic fertilizer production line equipment can be divided into powder organic fertilizer production line process and particle organic fertilizer production line process, with significant differences in occupied area and equipment infrastructure investment between the two.
Starting from the production line process of powdered organic fertilizer, the processing process of powdered organic fertilizer is that after the raw materials are fermented and matured, the main equipment can be sold as long as the processes such as crushing, stirring, and packaging are used. To put it bluntly, the production line process of powdered organic fertilizer is part of the particle processing process.
In terms of particle organic fertilizer production line technology, in addition to crushing, stirring, packaging and other processes, drying, granulation, particle grading, and particle coating are also required. Therefore, only processing production lines with an annual production capacity of over 10000 tons choose particle processing technology, while small capacity enterprises often choose powder fertilizer processing technology.
