The chicken manure dryer is suitable for large, medium and small chicken farms and areas where the breeding industry is relatively developed. According to the requirements of drying products, different heat sources can be used. Such as: gas producer, direct-heated hot air stove, indirect hot air stove, heat transfer oil, electric heating, steam, etc. This machine is suitable for chicken manure, duck manure, poultry manure, slaughtering waste, etc. with water content less than 65%. It has good effects on opening up feed resources, reducing feeding costs and reducing environmental pollution.
The organic fertilizer equipment of the small chicken manure dryer is mainly composed of a heat source, a feeding machine, a feeding machine, a rotary drum, a material crushing device, a discharging machine, an induced draft fan, a discharger and a power distribution cabinet; After the dehydrated wet material is added to the dryer, the material is evenly distributed in the dryer and fully contacted with hot air under the overturning of the uniformly distributed plate reader in the drum, which accelerates the heat and mass transfer of drying. During the drying process, the material is discharged to the star-shaped discharge valve at the other section of the dryer under the action of the inclined plate reading and the hot gas.
In the process of using the organic fertilizer equipment of the small chicken manure dryer, it is necessary to do a good job of maintenance. For example, in the long-term use of small chicken manure dryer, attention should be paid to:
1. At any time, carefully check whether the connections are firm and whether all parts are in good use. If any abnormality is found, timely notify the maintenance personnel for maintenance.
2. The hydraulic oil must be kept clean. The hydraulic oil should be replaced once when the new machine runs for the first week. When changing the oil, the used hydraulic oil in the oil tank and the oil cylinder should be drained and wiped clean. Continue to use it for one month and then replace it once every six months to ensure the normal use of the filter press.
3. The maintenance of the hydraulic system of the small chicken manure dryer is mainly the inspection and maintenance of the sealing of the hydraulic components and all interfaces.
4. The pull plate trolley, sprocket chain, bearing, piston rod and other parts shall be inspected regularly to keep the matching parts clean, with good lubrication performance and good operation instructions of hydraulic filter press to ensure flexible action. The synchronization of the pull plate trolley and the suspension of the chain shall be adjusted in time.
5. The sealing surface of the filter plate of the small chicken manure dryer should be checked frequently to ensure its smoothness and cleanness; Before compaction, the filter cloth shall be carefully checked to ensure that it is free from folding, damage and slag inclusion, and that it is flat and intact to ensure the filtering effect; At the same time, the filter cloth should be washed frequently to ensure the filtering performance of the filter cloth.
6. If it is not used for a long time, the filter plates should be cleaned and neatly placed on the frame of the filter press. Dry the filter cloth after cleaning; The exposed part of the piston rod and the integrated block shall be coated with grease.
