The small-scale manure Organic fertilizer production line fundamentally improves the pollution problem of agriculture and animal husbandry. A large amount of livestock manure produced by the farm is used to produce green Organic fertilizer. Organic fertilizer is returned to the field to plant organic agriculture. Agricultural wastes and agricultural fruits are fed to various livestock and poultry to form a natural green ecological biological chain, maintain Balance of nature, and let us find a new pastoral life.
.jpg)
Commissioning steps for complete equipment of Organic fertilizer production line:
1. Before starting the complete set of equipment for Organic fertilizer production line:
Due to the fact that the components of the new equipment have not yet been worn in, it is necessary to warm up the equipment during startup, which usually takes 40-50 minutes. For specific operations, first raise the temperature to the point where you can manually pull the triangular belt of the motor until it is free, and then continuously pull the motor 8-10 times according to the normal working option. Continue heating up for about 10 minutes.
2. Temperature control after startup of complete equipment of Organic fertilizer production line:
We have preliminarily adjusted the temperature of the equipment before startup. The treatment of materials by the complete set of equipment of Organic fertilizer production line in the production process is determined by the characteristics of the materials themselves. Therefore, after startup, we need to continue to heat up, because normal production needs to continue to supplement heat; Adjust different temperatures based on different properties of plastic.
3. When the Organic fertilizer production line works normally:
During normal operation, the machine temperature should remain stable and not fluctuate from high to low. Near the vent hole, the temperature of the machine head should be maintained at around 200 ℃. At this temperature, most materials can generally be processed well.
4. Shutdown of complete equipment of Organic fertilizer production line:
First of all, cut off the power supply of the host machine, and remove the head plug (with wrench) of the complete set of equipment for Organic fertilizer production line. Preheat separately before next use.
The installation sequence of complete sets of equipment for Organic fertilizer production line is scientific. The installation plan of complete sets of equipment for Organic fertilizer production line is considered from many aspects. The demonstration of relevant technical factors and the installation sequence are scientific and cannot be changed at will. Only by purposeful, planned and orderly installation of complete sets of equipment for Organic fertilizer production line can the best installation effect be achieved and work efficiency be improved. In addition, safety factors are also considered in the installation plan of complete sets of equipment for the Organic fertilizer production line. To ensure that there are no accidents in the use process is the real quality assurance.
