Application of organic fertilizer granulator in fertilizer production line
2023/07/05
In the production process of organic fertilizer, we need to pay attention to the matters of organic fertilizer granulator, and hope to help our customers.
(1) The organic fertilizer granulator should not be operated by the cooler on an empty stomach, but must be operated by the hot machine. In this way, the phenomenon of stick bar (holding shaft) can occur in the same year.
(2) It is strictly prohibited to enter the iron and other sundries in the feed port and vent hole of organic fertilizer granulator. So as not to cause accidents and affect production.
(3) The organic fertilizer granulator shall be in forward operation to avoid reverse operation.
Precautions during organic fertilizer granulator operation:
(1) Pay attention to the temperature change of the fuselage at any time. When touching the strip with clean hands, it should be heated up immediately. Until the strip is normal.
(2) When the bearing part of the reducer burns, or there is noise, it shall be repaired in time and added with oil.
(3) When the bearings at both ends of the bearing chamber of the main engine burn hands or have noise, stop the machine for maintenance and add grease. During normal operation, grease the bearing housing every 5-6 days.
(4) Pay attention to find out the operation rules of the machine, such as: the temperature of the machine and the speed of rotation, which can be handled in time according to the situation.
(5) In case of unstable operation of the fuselage, it is necessary to check whether the clearance of the coupling is too tight and adjust it in time.
The above is our introduction to the application of organic fertilizer granulator in the production line of organic fertilizer equipment. If you have any questions, please contact us. Welcome to visit, consult and negotiate with us!
.jpg)
